Control Techniques Commander SK Series AC Inverter for 3kW (3HP) 230V 3 Ph motor in VxF or Sensorless Vector control to 7.2A. Converts fixed frequency three phase 400V input to variable frequency three phase 400V for a standard AC Induction motor.
From October 2017 the CT Commander SK series is no longer available. The manufacturer recommends that customers upgrade to the Unidrive M200. See linked products below for M200 of equivalent rating and mounting adapter plate.
Size C: 100mm Wide x 173mm Deep x 258mm High. IP20
Weight: 2.1kg.
Overload: 150% x 60 seconds
Speed Control Range: 0-1500Hz
Braking: Minimum 55 Ohm, Maximum 4.6kW external resistor (not supplied) - use the 'Which Resistor' button on this page.
1 Analogue Input, 1 Analogue/Digital Input, 4 Digital Inputs, 1 Analogue Output, 1 Digital Input/Output, 1 Relay Contact set, RJ45 port for Modbus.
Input Current: 11.2
Input Voltage: 380-480V Three Phase ±10% at 50-60Hz ±5%
EMC Filters: EN 61800-3:2004 Second Environment (Industrial). Can be disabled using pull-tab.
Wall mount in clean environment or cubicle mount.
Rated 40°C Ambient.
Ventilation space in front: [not specified].
Ventilation space above and below: 100mm.
Ventilation space at sides: 10mm (50mm between drives).
Heat Loss at max output: 91W (at rated ambient temperature and default switching frequency).
Mounting via 4 x holes at rear for M4 screws on 70.7mm x 240mm centres.
Manufacturer part number is SKC3400300. Replaces Commander SE.
Download the Commander SK Manual and Guides from the links below:-