Parker SSD Drives 650V AC Frequency Inverter for 2.2kW (3HP) 400V 3 Ph motor in VxF or Sensorless Flux Vector control to 5.5A. Simple set-up and ready to run in VxF from its default settings.
73mm Wide x 173mm Deep x 192mm High.
Overload - 150% x 30seconds.
Speed Control Range - 0/240Hz.
Braking - 100% duty into minimum 200 Ohm external resistor. See the Resistor options linked below or use the 'Which Resistor' button on this page.
EMC Filters - None.
2 x Analogue Inputs, 3/4 Digital Inputs, 1 Analogue output, 1/2 Digital outputs (one relay and one programmable in/out).
Input Current - 9.4A.
Input Voltage - 380/460V three phase +-10% at 50/60Hz.
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation space above and below - 100mm.
Ventilation space at sides - 0mm.
Heat Loss at max output - 70W.
Mounting onto symmetrical DIN rail or use the detachable clip for screw fixing.
Full part number is 650V-43155020-B01P00-A2. Was 650V-022-400-0-00-DISPR-UK-RS0-0 and is exactly the same as SSD Drives, Eurotherm Drives products bearing the same part number.
Download the Parker 650V Quick Start Guide, Product Manual and Software Manual from the links below:-