Parker SSD 890 Series AC Frequency Inverter for 90kW (120HP) 400V 3 Ph motor to 135A. Operates in VxF, Sensorless Vector control or full closed-loop Flux Vector Control (with optional Encoder Feedback Card).
Advanced Performance - includes Basic LINK VM function blocks: math functions, Boolean logic, timers, counters, One shots, threshold comparators, latches, plus: motion control firmware with added position loop, motion control function blocks, move incremental, move absolute, move home, line drive master ramp and section control, winder blocks (SPW, CPW), full function PID, state machine, and others.
Size F - 257mm Wide x 355mm Deep x 720mm High. IP20
Weight: 41kg.
Overload - 150% x 60 seconds
Speed Control Range: 0-1000Hz (VxF), 0-350Hz (Closed-loop Vector), 0-120Hz (Sensorless Vector). 0-700Hz when de-rated to 155A for use with Permanent magnet motors.
Braking - To 5.5 Ohm minimum external resistor (not supplied) - use the 'Which Resistor' button on this page.
Safe Torque Off to SIL3 or PLe level as per EN ISO13849 and EN61800-5-2.
4 Analogue Inputs, 7 Digital Inputs, 2 Analogue Outputs, 2 Digital Inputs/Outputs, 1 Relay Contact Set, USB port for Programming.
Input Current - 164A.
Input Voltage - 380-460V ±10%, 50/60Hz ±5%
EMC Filters to EN61800-3 to the 2nd Environment (Industrial).
Wall mount in clean environment or cubicle mount.
Rated 40°C Ambient.
Ventilation space in front - 25mm
Ventilation space above and below - 70mm.
Ventilation space at sides - 0mm (drives can be mounted side by side).
Mounting via 4 x holes for M6 bolts at rear (2 top, 2 bottom) on 700mm x 150mm centres.
Full part number is - 890SD-433180F2-B07-1A000.