SSD 650V AC Frequency Inverter for 55 kW (75HP) 400V 3 Ph motor to 105A at high overload or 75 kW (100HP) to 145A when Fan/Pump rated, operates in VxF or Sensorless Flux Vector. Simple set-up and ready to run in VxF from its default settings.
Size F - 257mm Wide x 355mm Deep x 720mm High overall.
Overload - up to 150% x 60 seconds and 180% for 0.5seconds (at high overload rating).
Speed Control Range - 0/240Hz
Braking - 100% x 20 seconds duty or 30% continuous into minimum 8 Ohm external resistor. See the Resistor options linked below or use the 'Which Resistor' button on this page.
2 x Analogue Inputs, 3/5 Digital Inputs, 1 Analogue output, 1/3 Digital outputs (one relay and one programmable in/out).
Input Current - 114A at high overload or 143A when Fan/Pump rating set.
Input Voltage - 380/460V three phase +-10% at 50/60Hz.
Input fuse - 125A at high overload and 160A when Fan/Pump rating set - to suit input bridge at 100000A²s
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation fan is 130W requiring a 115V supply fused at 3A.
Ventilation space above and below - 70mm.
Ventilation space at sides - 25mm.
Heat Loss at max output - 1220W at high overload or 1670W when Fan/Pump rating set.
Mounting - M6 screw fixings on 150mm x 700mm centres.
Manufacturer part number is 650V-433105F1-B01P00-A3. Legacy part number is 650VF-0550-400-0011-UK-0-0-B0-115-0. Exactly the same as SSD Drives and Eurotherm Drives branded product bearing the same legacy part number in all but livery.
Replaces:- 584SV/0550/400/0011/UK/000/0000/00/000/000,
Download the 650V Manual from the link below:-