SSD 650V AC Frequency Inverter for 30W (40HP) 400V 3 Ph motor to 59A at high overload or 37kW (50HP) to 73A when Fan/Pump rated, operates in VxF or Sensorless Flux Vector control. Simple set-up and ready to run in VxF from its default settings.
Dimensions: Size D, 252mm Wide x 245mm Deep x 453mm High.
Overload: 150% x 30seconds and 180% for 0.5seconds.
Speed Control Range: 0/240Hz.
Braking: 35% duty or 100% for 20seconds into minimum 21 Ohm external resistor. See the Resistor options linked below or use the 'Which Resistor' button on this page.
Features: 2 x Analogue Inputs, 3/5 Digital Inputs, 1 Analogue output, 1/3 Digital outputs (one relay and one programmable in/out).
Input Current: 66A at high overload or 84A when Fan/Pump rating set.
Input Voltage: 380V-460V three phase +-10% at 50/60Hz.
Input fuse: 80A at high overload or 100A when Fan/Pump rating set - to suit input bridge at 15000A²s.
Switching frequency: 3kHz (default).
Mounting: Wall mount in clean environment or cubicle mount.
Ambient temperature: Rated at 40C
Ventilation space above and below: 70mm.
Ventilation space at sides: 15mm.
Heat Loss: 860W at high overload or 1030W when Fan/Pump rating set.
Mounting: via M6 screw fixing on 150mm x 440mm centres.
New part number: 650V-432590D0-B01P00-A3. Legacy part number: 650VD-0300-400-0011-UK-0-0-B0-0-0. Exactly the same as SSD Drives and Eurotherm Drives: 650VD-0300-400-0010-UK-0-0-B0-0-0. Use this for the same application as 650V-432590D0-001P00-A3 (650VD-0300-400-0011-UK-0-0-00-0-0).