SSD 650V AC Frequency Inverter for 15kW (20HP) 400V 3 Ph motor to 30A at high overload, or 18.5kW (25HP) to 37A when Fan/Pump rated, operates in VxF or Sensorless (open loop) Flux Vector control. Simple set-up and ready to run in VxF from its default settings.
Size C - 201mm Wide x 208mm Deep x 348mm High.
No keypad included.
Overload - 150% x 30seconds and 180% for 0.5seconds.
Speed Control Range - 0/240Hz.
Braking - 25% duty or 80% for 20seconds into minimum 50 Ohm external resistor. See the Resistor options linked below or use the 'Which Resistor' button on this page.
2 x Analogue Inputs, 3/5 Digital Inputs, 1 Analogue output, 1/3 Digital outputs (one relay and two programmable in/out).
Input Current - 37A at high overload or 44A when Fan/Pump rating set.
Input Voltage - 380/460V three phase +-10% at 50/60Hz.
Input fuse - 40A at high overload or 50A when Fan/Pump rating set - to suit input bridge at 6000A²s.
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation space above and below - 70mm.
Ventilation space at sides - 15mm.
Heat Loss at max output - 500W at high overload or 610W when Fan/Pump rating set.
Mounting with M6 screw fixing on 150mm x 335mm centres.
New part number is - 650V-432300C0-B01P00-A0
Part number was - 650VC-0150-400-0010-UK-0-0-B0-0-0 - Exactly the same as SSD Drives and Eurotherm Drives product of the same part number.
Download the Parker SSD 650V Manual, Quick Start Guide and Software Manual from the links below:-