Parker AC10 series AC Inverter for 1.5kW (2HP) 400V 3 Ph motor in VxF or Sensorless Vector control to 4A. Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction motor or permanent magnet synchronous motor. Rated to IP66 for use in dusty indoor environments.
Dimensions: Size 1 200mm Wide x 198mm Deep x 412mm High.
Enclosure Rating: IP66.
Overload: 150% x 60 seconds
Speed Control Range: 0.5-590Hz
Braking: Minimum 150 Ohm external resistor (not supplied), use the 'Which Resistor' button on this page.
Features: Integrated Keypad, 2 Analogue Inputs, 6 Digital Inputs, 1 Analogue Output, 1 Digital Output, 2 Relay Contact sets, Terminals for Modbus RS485 Communications.
Input Current: 6.9A
Input Voltage: 380V-480V Three Phase +10% -15% at 50-60Hz.
EMC Filters: IEC EN 61800-3 (2004)(+A1:2012) Category C3 (Industrial).
Mounting: Wall mount or Cubicle mount via holes at rear for M5 screws on 171mm x 398mm centres.
Ambient: Rated 40°C.
Heat Loss: [not specified].
Part Number: 16G-41-0040-BF.
Download the Parker SSD AC10 IP66 Manual from the link below:-