Mitsubishi FR-E700 Series AC Frequency Inverter for 5.5kW (7.5HP) 3 Phase motor in VxF or Sensorless Vector control to 12A. Simple set-up with 400V three phase input for a standard AC Induction motor.
Size 4 - 220mm Wide x 147mm Deep x 150mm High. IP20
Overload - 150% x 60 seconds, 200% x 3 seconds
Speed Control Range - 0.2Hz to 400Hz.
Braking - To 110 Ohm minimum external resistor (not supplied) - use the 'Which Resistor' button on this page.
2 Analogue Inputs, 7 Digital Inputs, 1 Analogue Output, 2 Digital Outputs, 2 Relay Contact Sets, Modbus RTU, integrated USB port.
Input Current - 15.7A.
Input Voltage - 380-480V Three Phase +10% -15% at 50/60Hz ±5%
EMC Filters - Not included (see linked products below for external EMC filter module)
Wall mount in clean environment or cubicle mount.
Rated -10° to 50°C Ambient.
Ventilation space in front - 50mm
Ventilation space above and below - 100mm.
Ventilation space at sides - 0mm (50mm when surrounding air temperature exceeds 40°C).
Mounting via 4 x 5mm diameter holes at rear on 208mm x 138mm centres.
Full part number is - FR-E740-120-EC
See below for replacement
Can be used as an alternative or to replace FR-E740-5.5K, FR-E740-120-NA or FR-E740-5.5K-CHT subject to the differences detailed in the FR-E700 Overseas Specification Comparison document (see link to PDF below).
Download the Mitsubishi E700 Manual and Installation Guide from the links below:-