Mitsubishi Automation CS80 series AC Inverter for 5.5kW 400V 3ph motor to 9.1A. Operates in standard V/F or Sensorless Vector Control and Converts fixed frequency 400V three phase input to variable frequency 400V three phase to control the speed of a standard AC Induction motor.
Size 3: 197.5 mm wide x 134 mm deep x 150 mm high
Protection: IP20; PCB’s coated to 3C2 standard
1.9kG
Output: 9.1A, 5.5kW at 400V
Overload: 150% for 60 Seconds, 200% for 0.5 seconds.
Speed Control Range: 0.2 to 400Hz.
Braking (DBr): Not Fitted, optional external braking unit can be fitted if required
Fixed Keypad. Optional door mounted keypad is available
2 x Analogue Inputs, 5 Digital Inputs, 0 Analogue outputs, 1 Relay Contact set and 0 digital outputs
Fieldbus: RS485, MODBUS RTU Protocol via PU Connector
Programmable from the Keypad, PC via FR-Configurator2 software (converter required) or from the 10 key hand-held parameter unit (see Linked Products below)
Safety Features: None; STO is not fitted
EMC Filter: None (Unfiltered). See linked products below for external footprint EMC Filter Module
Input Rating: 12kVA; 30A MCCB recommended
Input Voltage: 380-480V three phase -15%, +10% at 50/60Hz +/- 5%.
Cubicle Mount
Ambient Temperature: 40°C; 50°C maximum with de-rating
Mount via 2 x 5mm hole (top) and 2 x 5mm slots (bottom) on 138mm (H) x 185.5mm (W) centres.
Ventilation Space: 100mm above, 100mm below, 10mm at sides and 10mm in front.
Heat Loss at max output: 140W.
Full part number is: FR-CS84-120-60, Alternative Part Number: 325745. New Product does not replace any previous generation