Mitsubishi Automation D740 Series AC Frequency Inverter for 0.55kW (0.75HP) or 0.75kW (1HP) 400V 3 Ph motor in VxF or Vector control to 2.2A. Simple to set-up for speed control of a standard three phase AC Induction motor.
Size 2A: 108mm wide x 129.5mm deep x 128mm high in IP20 case.
Overload - 150% x 60 Seconds and 200% for 0.5 seconds.
Speed Control Range - 0.2-400Hz.
Braking - 30% rated to 700 Ohm minimum external resistor (not supplied) - use the 'Which Resistor' button on this page to select a suitable resistor.
Features - Front Mounted Potentiometer, 2 x Analogue Inputs, 5 Digital Inputs, 1 Analogue output, 1 Relay Contact set and 1 digital output.
Programmable from a pc via FR-Configurator software (V30010-E), or from the 10 key hand-held parameter unit (see Linked Products below).
EMC Filters - None. See linked products below for external footprint EMC Filter Module.
Input Current - not specified.
Input Voltage - 380-480V three phase -15% +10% at 50/60Hz ±5%.
Cubicle or enclosure mounting.
Rated at 50C Ambient.
Ventilation space above and below - 100mm.
Ventilation space at sides - 0mm up to 40C, or 10mm above 40C.
Ventilation space in front - 10mm.
Heat Loss at max output - 55W.
Mounting via 4 x 5mm holes for rear mounting.
Full part number is - FR-D740-022-EC
Replaces the FR-E540-0.75K-EC from the FR-S500 and FR-E500 range.
Download the Mitsubishi D700 Manual and Installation Guide from the links below:-