Mitsubishi D740 5.5kW 400V 3ph AC Inverter Drive, Unfiltered

Mitsubishi Automation D740 AC Frequency Inverter for a 5.5kW (7.5HP) 400V 3 Ph motor in VxF or Vector control to 12A. Simple to set-up for speed control of a standard three phase AC Induction motor.

Size 4: 220mm wide x 155mm deep x 150mm high in IP20 case.
Weight is 3.1kg

Overload - 150% x 60 Seconds and 200% for 0.5 seconds.
Speed Control Range - 0.2-400Hz.
Braking - 30% rated to 110 Ohm minimum external resistor (not supplied) - use the Which Resistor button on this page to select a suitable resistor.

Features - Front Mounted Potentiometer, 2 x Analogue Inputs, 5 Digital Inputs, 1 Analogue output, 1 Relay Contact set and 1 digital output.
Programmable from a pc via FR-Configurator software (V30010-E), or from the 10 key hand-held parameter unit (see Linked Products below).
EMC Filters - None. See linked products below for external footprint EMC Filter Module.

Input power supply capacity - 12kVA.
Input Voltage - 380/480V three phase +-10% at 50/60Hz.

Cubicle or enclosure mounting.Rated at 50C Ambient.
Ventilation space above and below - 100mm.
Ventilation space at sides - 0mm up to 40C, or 50mm above 40C.
Ventilation space in front - 50mm.
Heat Loss at max output - 240W.
Mounting onto rear screw fixings through 4 x 5mm holes at 128mm x 138mm.

Full part number is - FR-D740-120-EC

Replaces the FR-E540-5.5K-EC from the FR-S500 and FR-E500 range.

Download the Mitsubishi D700 Manual and Installation Guide from the links below:-