Mitsubishi Automation D740 Series AC Frequency Inverter for 3.7kW (5HP) 400V 3 Ph motor in VxF or Vector control to 8A. Simple to set-up for speed control of a standard three phase AC Induction motor.
Fitted with E8 Washing Machine Software.
Size 2D: 108mm wide x 165.5mm deep x 128mm high in IP20 case.
Overload: 150% x 60 Seconds and 200% for 0.5 seconds.
Speed Control Range: 0.2-400Hz.
Braking: 30% rated to 150 Ohm minimum external resistor (not supplied) - use the 'Which Resistor' button on this page to select a suitable resistor.
Features: Front Mounted Potentiometer, 2 x Analogue Inputs, 5 Digital Inputs, 1 Analogue output, 1 Relay Contact set and 1 digital output.
Programmable from a pc via FR-Configurator software (V30010-E), or from the 10 key hand-held parameter unit (see Linked Products below).
EMC Filters: None. See linked products below for external footprint EMC Filter Module.
Input Current: not specified.
Input Voltage: 380-480V three phase -15% +10% at 50/60Hz ±5%.
Mounting: Cubicle or enclosure mounting via 4 x 5mm holes at the rear.
Ambient: Rated at 50C.
Ventilation space above and below: 100mm.
Ventilation space at sides: 0mm up to 40C, or 10mm above 40C.
Ventilation space in front: 10mm.
Heat Loss at max output: 180W.
Full part number: FR-D740-080-E8 (FR-D740-080EC, D740080EC)
Download the Mitsubishi D700 Manual and Installation Guide from the links below:-