Nidec Control Techniques Unidrive M101 series AC Inverter for 4kW (5.5HP) 400V 3ph motor in VxF or sensorless vector control to 9.4A. Converts fixed frequency 400V three phase input to variable frequency 400V three phase for a standard AC Induction motor.
** Special Price - Available from stock only - Brand new with manufacturers warranty**
Size 3: 90mm wide x 171mm deep x 226mm high; IP20
Mounting via 4 x 5mm diameter holes at rear on 70.7mm x 215mm centres
Weight: 1.5kg.
Overload: 150% x 60 seconds
Speed Control Range: 0-550Hz
Dynamic Braking (DBr): Internal Brake Switch fitted. (Does not have to be used; available if required)
100% duty into minimum 100 Ohm, maximum 150 Ohm external resistor (not supplied). See linked products below or compatible resistor.
Fixed keypad with potentiometer, 1 Analogue Input, 3 Digital Inputs, 1 Digital Input/Output, 1 Relay Contact (normally open), no Analogue Outputs, no communications.
STO: Not available on this model.
Input Current: 13.1A
Input Voltage: 380V-480V Three Phase ±10% at 50-60Hz ±5%
Earth Leakage for EMC: 5.7mA at 50Hz
EMC Compliance: IEC EN 61800-3 Category C3 (Industrial) for cable lengths to 2m. Filter can be removed if required.
Cubicle mount.
Ambient operating temperature to 40°C.
Ventilation space in front: [not specified], above and below: 100mm, at sides: 0mm (between drives).
Heat Loss at max output: 116W (at rated ambient temperature and default switching frequency).
Manufacturer part number is M101-03400094. Previously marketed as Emerson Control Techniques, a division of Emerson. Now sold as Nidec Control Techniques, part of the Nidec group.
Download the CT Unidrive M101 Quick Start, Installation and Control guides from the links below:-