Nidec Control Techniques Unidrive M101 series AC Inverter for 0.37kW (0.5HP) 400V 3ph motor in VxF or sensorless vector control to 1.3A. Converts fixed frequency 400V three phase input to variable frequency 400V three phase for a standard AC Induction motor.
** Available from stock only**
Size 2: 78mm wide x 161mm deep x 205mm high; IP20
Mounting via symetrical DIN rail, or 4 x 5mm diameter holes at rear on 55mm x 194mm centres
Weight: 1kg.
Overload: 150% x 60 seconds
Speed Control Range: 0-550Hz
Dynamic Braking (DBr): Internal Brake Switch fitted. (Does not have to be used; available if required)
100% duty into minimum 270 Ohm, maximum 1500 Ohm external resistor (not supplied). See linked products below or compatible resistor.
Fixed keypad with potentiometer, 1 Analogue Input, 3 Digital Inputs, 1 Digital Input/Output, 1 Relay Contact (normally open), no Analogue Outputs, no communications.
STO: Not available on this model.
Input Current: 2.1A
Input Voltage: 380V-480V Three Phase ±10% at 50-60Hz ±5%
Earth Leakage for EMC: 9.2mA at 50Hz
EMC Compliance: IEC EN 61800-3 Category C3 (Industrial) for cable lengths to 2m. Filter can be removed if required.
Cubicle mount.
Ambient operating temperature to 40°C.
Ventilation space in front: [not specified], above and below: 100mm, at sides: 0mm (between drives).
Heat Loss at max output: 33W (at rated ambient temperature and default switching frequency).
Manufacturer part number is M101-02400013. Equivalent to M100-02400013. Previously marketed as Emerson Control Techniques, a division of Emerson. Now sold as Nidec Control Techniques, part of the Nidec group.
Download the CT Unidrive M101 Quick Start, Installation and Control guides from the links below:-