LS Industrial Systems Starvert iS7 AC Frequency Inverter for 55kW (75HP) 400V 3 Ph motor to 110A at high overload, or 75kW (100HP) to 152A when Fan/Pump rated. Operates in VxF, Sensorless (Open Loop) Flux Vector control or Closed Loop Flux Vector (with optional encoder feedback card). Simple set-up and ready to run from its default settings.
** Please note that this product has been superceded with the S100 Series (see linked products below). The manufacturer recommends that all users should migrate to the S100 before the iS7 is made obsolete**
Includes Standard Multiline Keypad. See linked products below for equivalent without keypad
Dimensions - 370.1mm Wide x 373.3mm Deep x 663.5mm high. IP21.
Overload - 150% x 60 seconds, 200% for 2 seconds (55kW High Overload).
Overload - 110% x 60 seconds (75kW Fan/Pump rated).
Speed Control Range - 0-400Hz.
Braking - None (option).
Features - Modbus RTU, 1 x Analogue Input, 8 Digital Inputs, 2 x Analogue Outputs (one Voltage one Current), 1 x Digital Output, 1 x Relay Contact set.
Programmable from a PC via 'Drive View'.
EMC Filters - None. See linked products below for external EMC Filter option.
Input Current - 113A at High Overload, 162A when Fan/Pump rated.
Input Voltage - 380-480V three phase +10%, -15% at 50/60Hz ±5%.
PCB’s protected to 90%RH as standard.
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation space above and below - 500mm.
Ventilation space at sides - 200mm.
4 x 10mm diameter mountings at rear for mounting.
Full part number is - SV0550iS7-4NOD
Download the LS Starvert iS7 Manual from the link below:-