LS Industrial Systems Starvert iS7 AC Frequency Inverter for 18.5kW (25HP) 400V 3 Ph motor to 39A at high overload, or 22kW (30HP) to 45A when Fan/Pump rated. Operates in VxF, Sensorless (Open Loop) Flux Vector control or Closed Loop Flux Vector (with optional encoder feedback card). Simple set-up and ready to run from its default settings.
** Please note that this product has been superceded with the S100 Series (see linked products below). The manufacturer recommends that all users should migrate to the S100 before the iS7 is made obsolete**
No Keypad included - see linked products below for keypad option and equivalent with keypad.
Dimensions - 280mm Wide x 298mm Deep x 461.6mm high. IP21.
Overload - 150% x 60 seconds, 200% for 2 seconds (18.5kW High Overload).
Overload - 110% x 60 seconds (22kW Fan/Pump rated).
Speed Control Range - 0-400Hz.
Braking - To 20 Ohm minimum external resistor (not supplied) - use the 'Which Resistor' button on this page to select a suitable resistor.
Features - Features - Modbus RTU, 2 x Analogue Inputs, 8 Digital Inputs, 2 x Analogue Outputs, 1 x Digital Output, 2 x Relay Contact sets.
Programmable from a PC via 'Drive View'.
EMC Filters to EN61800-3 to the 2nd Environment C3 (Industrial).
Input Current - 56.9A at High Overload, 40A when Fan/Pump rated.
Input Voltage - 380-480V three phase +10%, -15% at 50/60Hz ±5%.
PCB’s protected to 90%RH as standard.
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation space above and below - 500mm.
Ventilation space at sides - 200mm.
4 x 6.5mm diameter mountings at rear for mounting.
Full part number is - SV0185iS7-4NOFD
Download the LS Starvert iS7 Manual from the link below:-