LS Industrial Systems Starvert iS7 AC Frequency Inverter for 75kW (100HP) 400V 3 Ph motor to 152A at high overload, or 90kW (120HP) to 183A when Fan/Pump rated. Operates in VxF, Sensorless (Open Loop) Flux Vector control or Closed Loop Flux Vector (with optional encoder feedback card). Simple set-up and ready to run from its default settings.
** Please note that this product has been superceded with the S100 Series (see linked products below). The manufacturer recommends that all users should migrate to the S100 before the iS7 is made obsolete**
No Keypad included - see linked products below for keypad option.
Dimensions - 370.1mm Wide x 373.3mm Deep x 663.5mm high. IP21.
Overload - 150% x 60 seconds, 200% for 2 seconds (75kW High Overload).
Overload - 110% x 60 seconds (90kW Fan/Pump rated).
Speed Control Range - 0-400Hz.
Braking - None (option).
Features - Modbus RTU, 1 x Analogue Input, 8 Digital Inputs, 2 x Analogue Outputs (one Voltage one Current), 1 x Digital Output, 1 x Relay Contact set.
Programmable from a PC via 'Drive View'.
EMC Filters - None. See linked products below for external EMC Filter option.
Input Current - 154A at High Overload, 195A when Fan/Pump rated.
Input Voltage - 380-480V three phase +10%, -15% at 50/60Hz ±5%.
PCB’s protected to 90%RH as standard.
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation space above and below - 500mm.
Ventilation space at sides - 200mm.
4 x 10mm diameter mountings at rear for mounting.
Full part number is - SV0750iS7-4NOD
Download the LS Starvert iS7 Manual from the link below:-