LSLV S100 series AC Inverter for 7.5kW (10HP) 400V 3 Ph motor to 16A. Operates in VxF or Sensorless Vector mode and converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC induction motor.
Size 3: 250mm Wide x 242mm Deep x 328mm High. IP66
Weight: 8.9kg.
Front Mounted Mains Disconnect Switch (SW)
Overload: 150% x 60 seconds.
Speed Control Range: 0-400Hz
Braking (DBr): Minimum 85 Ohm minimum external resistor (not supplied) - use the 'Which Resistor' button on this page.
Built-in Safe Torque Off (STO)
Integrated Keypad, 2 Analogue Inputs, 5 Digital Inputs, 1 Analogue Outputs, 1 Digital Output, 1 Relay Contact sets, DC Bus +/- Terminals.
'Safe Torque Off' (STO) function to SIL 2 (EN 61508) via Digital Input.
Input Current: 17.5A .
Input Voltage: 380-480V Three Phase +10% -15% at 50-60Hz ±5%
EMC Compliance: IEC EN 61800-3 Category C3, (Class A) Industrial.
Wall mount.
Rated 40°C ambient.
Ventilation space in front: 50mm.
Ventilation space above and below: 100mm.
Ventilation space at sides: 50mm.
Ventilation space between: 50mmmm
Heat Loss at max output: [not specified]
Mounting via 4 x 5.5 mm diameter holes at rear on 204mm x 241mm centres.
Manufacturer part number is LV0075S100-4EXFNS. LSLV0075S100-4EXFNS
Download the LS S100 Manual from the links below:-