LSLV S100 series AC Inverter for 15kW (20HP) 400V 3 Ph motor to 30A at high overload, or 18.5kW (25HP) to 38A when Fan/Pump rated. Operates in VxF or Sensorless Vector mode and converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC induction motor.
Size 5: 180mm Wide x 163mm Deep x 290mm High. IP20
Weight: 10.5kg.
Overload: 150% x 60 seconds, (High Overload)Overload: 120% x 60 seconds (Fan/Pump rated)
Speed Control Range: 0-400Hz
Braking: Minimum 30 Ohm minimum external resistor (not supplied) - use the 'Which Resistor' button on this page.
Built-in Safe Torque Off (STO)
Integrated Keypad, 2 Analogue Inputs, 5 Digital Inputs, 1 Analogue Outputs, 1 Digital Output, 1 Relay Contact sets, DC Bus +/- Terminals.
'Safe Torque Off' (STO) function to SIL 2 (EN 61508) via Digital Input.
Input Current: 33.4A (high overload), 42.5A (fan/pump rated)
Input Voltage: 380-480V Three Phase +10% -15% at 50-60Hz ±5%
EMC Compliance: IEC EN 61800-3 Category C3, (Class A) Industrial. Can Be disabled via connector switch if nescessary
Wall mount.
Rated 50°C Ambient (high overload), 40°C ambient (fan/pump rated).
Ventilation space in front: [not specified].
Ventilation space above and below: 100mm.
Ventilation space at sides: 50mm.
Ventilation space between: 2mm.
Heat Loss at max output: [not specified]
Mounting via 4 x 5mm diameter holes at rear on 193.8mm x 331mm centres.
Manufacturer part number is LV0150S100-4EOFNS, LSLV0150S100-4EOFNS (LV0150S100-4E0FNS)
Download the LS S100 Manual from the links below:-