Invertek Optidrive Eco IP20 series AC Inverter for 90kW (150HP) 400V 3 Ph Fan or Centrifugal Pump in VxF or Sensorless Vector control to 180A. Converts fixed frequency three phase 400V input to variable frequency 400V to control the speed of a standard AC Induction Motor or permanent magnet synchronous motor.
Pump Control Features:-
User configurable pump load monitoring with auto tune function. Adjustable Pump Cleaning Cycle operation. Automatic pump stir function. Control of fixed speed assist pumps via optional cascade control module. Control of Duty, Assist and Standby variable speed pumps via internal Master - Slave network.
Fan & HVAC Control Features:-
Fire Mode: Selectable direction. Selectable speed reference
Broken Belt Detection: Under load monitoring with auto tune configuration.
PID Control: Internal PID control with feedback display.
Size 6B: 330mm wide x 320mm deep x 727mm high. IP20.
Weight: 43kg.
Overload: 110% x 60 seconds
Speed Control Range: 0-120Hz.
Braking: None.
Integrated TFT Keypad (High Definition LCD) ** This item may be supplied with an alternative display to ensure delivery times can be met**
3 Digital Inputs, 2 Analogue/Digital Inputs, 2 Digital Outputs, 2 Relay Contact sets, terminals for STO (Safe Torque Off) to SIL2. RJ45 socket for Modbus or BACnet communications over RS485. Other fieldbus options are available – see linked products below.
Input Current: 167.4A
Input Voltage: 380-480V Three Phase ±10% at 50-60Hz
EMC Filters: IEC EN61800-3:2004 Category C2 (Industrial and restricted Domestic).
Cubicle mount.
Rated 50°C Ambient.
Ventilation space in front: [Not Specified]
Ventilation space above and below: 200mm
Ventilation space at sides: 25mm
Mounting via 4 x slotted holes at rear for M8 screws on 200mm x 578mm centres.
Manufacturer part number is ODV-3-641800-3F12-MN.
Made in the UK.
Download the Invertek Optidrive Eco Manual from the link below:-