Invertek Optidrive Plus 3GV AC Frequency Inverter for 132kW (200HP) 400V 3 Ph motor in VxF, Sensorless Flux Vector or Full Closed Loop Flux Vector control (when the optional encoder board is fitted). Simple set-up and ready to run in VxF from its default settings.
Frame 6 Size - 340mm Wide x 330mm Deep x 1100mm High, IP20.
Weight: 55kg + 27kg Choke (included)
Overload - 150% x 60 seconds, 175% x 2 seconds.
Speed Control Range - 0-500Hz.
Braking - To 6 Ohm minimum external resistor (not supplied) - use the 'Which resistor' button on this page.
Features - 1 Digital Input, 2 x Analogue/Digital Inputs, 1 x Digital Input/Output, 1 x Analogue/Digital Output, 1 Relay Contact set.
Parameter setting via integral keypad, remote mounting keypad (optional) or PC.
Parameter setting from compatible Windows based PDA or Smartphone cable-free via 'OptiWand' software
EMC Filters to EN61800-3 category C1 for screened cable lengths of up to 5m
EMC Filters to EN61800-3 category C2 for screened cable lengths of up to 25m
EMC Filters to EN61800-3 category C3 for screened cable lengths of up to 50m
Input Current - 256A
Input Voltage - 380-480V ± 10% Three Phase at 48-62Hz
Rated at 50°C Ambient.
Mount in force-ventilated cabinet using 4 x M8 keyhole slots at rear on 320mm x 645mm centres.
Full part number is - ODP-64132-IN
Made in the UK.
Download the Invertek Optidrive Manual from the link below:-