Invertek Optidrive P2 IP66 Series AC Inverter for 7.5kW (10HP) 400V 3 Ph motor to 18A. Operates in VxF, Sensorless Vector or Full Closed-loop Flux Vector (when the optional Encoder Feedback card is fitted). Converts fixed frequency Three Phase 400V input to variable frequency 400V to control the speed of a standard AC induction motor or permanent magnet synchronous motor.
Size 3: 211mm Wide x 251mm Deep x 310mm High. IP66.
Weight: 7.3kg.
Overload: 150% x 60 seconds
Speed Control Range: 0-500Hz.
Braking: To 50 Ohm minimum external resistor (not supplied) - See the Resistor options linked below or use the 'Which Resistor' button on this page.
OLED Display.
2 Analogue Inputs, 3 Digital Inputs, 2 Analogue/Digital Outputs, 2 Relay Contact Sets. Additional I/O expansion options are available – see linked products below.
DC Bus terminals for DC supply or common bus energy saving applications.
Terminals for Safe Torque Off (EN62061 SIL Level 2), RJ45 RS-485/Modbus RTU/CANopen communications socket.
Input Current: 21A
Input Voltage: 380-480V Three Phase ±10% at 50-60Hz ±5%
EMC Filters: IEC EN61800-3:2004 Category C2/C3 (Industrial).
Wall mount
Rated 40°C Ambient.
Ventilation space in front: [Not Specified]
Ventilation space above and below: 200mm
Ventilation space at sides: 10mm
Mounting via 4 x slotted holes at rear for M4 screws on 198mm x 252mm centres.
Manufacturer Part Number is ODP-2-34075-3KF4Y-TN - (replaces ODP-2-34075-3KF4Y-SN)
Made in the UK.
Download the Invertek Optidrive P2 Manual and Advanced User Guide from the links below:-