IMO Jaguar Cub Series AC Frequency Inverter for 1.5kW (2HP) 400V 3 Ph motor in VxF or Sensorless Flux Vector Control to 3.7A. Simple to set-up for a standard AC Induction motor.
Size 3 - 140mm Wide x 182mm Deep x 180mm High (plus EMC flange at 65mm). IP20
Weight: 2.3kg.
Overload - 150% x 60 seconds, 200% x 0.5 seconds.
Speed Control Range: 0-400Hz.
Braking - To 160 Ohm minimum external resistor (not supplied) - use 2 x 100 Ohm resistors in series or press the 'Which Resistor' button on this page.
2 Analogue Inputs, 5 Digital Inputs, 1 Analogue Output, 2 Digital Output, 1 Relay Contact Set. RS485 / Modbus RTU (optional).
Input Current - 5.9A.
Input Voltage - Three Phase 380-480Vac -15% +10% at 50/60Hz -5% +5%
EMC Filters to EN61800-3 2nd Environment (Industrial).
Wall mount in clean environment or cubicle mount.
Rated 50°C Ambient.
Ventilation space in front - [Not Specified]
Ventilation space above and below - 100mm.
Ventilation space at sides - 0mm at 40°C Ambient, 10mm at 50° Ambient.
Mounting via 4 x 5mm diameter holes at rear on 128mm x 168mm centres.
Full part number is - CUB3A7-4E.
Download the IMO Cub Manual from the link below:-