IMO Jaguar Cub Series AC Frequency Inverter for 0.75kW (1HP) 400V 3 Ph motor in VxF or Sensorless Flux Vector Control to 2.5A. Simple to set-up for a standard AC Induction motor.
**Available from stock only**
Size 2 - 110mm Wide x 182mm Deep x 130mm High (plus EMC flange at 50mm). IP20
Weight: 1.2kg.
Overload - 150% x 60 seconds, 200% x 0.5 seconds.
Speed Control Range: 0-400Hz.
Braking - To 200 Ohm minimum external resistor (not supplied) - See the Resistor options linked below or use the 'Which Resistor' button on this page.
2 Analogue Inputs, 5 Digital Inputs, 1 Analogue Output, 2 Digital Output, 1 Relay Contact Set. RS485 / Modbus RTU (optional).
Input Current - 3.1A.
Input Voltage - Three Phase 380-480Vac -15% +10% at 50/60Hz -5% +5%
EMC Filters to EN61800-3 2nd Environment (Industrial).
Wall mount in clean environment or cubicle mount.
Rated 50°C Ambient.
Ventilation space in front - [Not Specified]
Ventilation space above and below - 100mm.
Ventilation space at sides - 0mm at 40°C Ambient, 10mm at 50° Ambient.
Mounting via 4 x 5mm diameter holes at rear on 118mm x 97mm centres.
Mounting onto 35mm DIN rail with optional rail mounting base.
Full part number is - CUB2A5-4E.
Download the IMO Cub Manual from the link below:-