IMO HD2 Series AC Inverter for 30kW 400V 3ph motor to 60A. Operates in VxF, Sensorless Vector or Full Closed-loop Vector control (with the optional encoder feedback card) and converts fixed frequency Three Phase 400V input to variable frequency Three Phase 400V to control a standard AC induction or permanent magnet synchronous motor.
Size 5: 250mm Wide x 223mm Deep x 400mm High. IP20.
Weight: 16kg.
Overload: 150% for 60 seconds. 200% for 1 second
Speed Control Range: 0-400Hz.
Braking (DBr): Built-in braking transistor. A 17 Ohm (minimum), 17 Ohm (100% braking torque) external resistor is required for Dynamic Braking. Resistor is not supplied and should only be fitted if this feature is required. Resistor option given below.
Includes removable Operator Keypad
2 Analogue Inputs, 6 Digital Inputs (2 Pulse Inputs), 1 Analogue Outputs, 2 Digital Output (1 Pulse Output), 2 Relay Outputs (Change-over)
Serial Communications: Terminals for Modbus RS485
Safe Torque Off (STO) function to SIL2 (EN61800-5-2)
Input Current: 70A
Input Voltage: 380-480V Three Phase -15% +10% at 50-60Hz ±5%.
EMC Filter: IEC EN 61800-3 Category C3 (Industrial).
Cubicle mount.
Rated ambient: 40°C. Maximum ambient: 50°C (De-rate required)
Ventilation space in front: [not specified], above: 100mm, below: 100mm, at sides: 100mm.
Heat Loss at max output: xxW
Mounting via 4 x M5 bolts (not supplied) at rear on 380mm x 230mm centres.
Manufacturer part number is HD2-60A-43.