Delta VFD-E Series AC Inverter for 22kW (30HP) 400V 3ph motor to 45A. Operates in VxF or Sensorless Vector and converts fixed frequency Three Phase 400V input to variable frequency Three Phase 400V to control a standard AC Induction Motor.
Output Current: 45A with 150% Overload for 30 seconds
Input Current: 49A
Input Voltage: Three phase AC 380V–480V (+/-10 %), 50/60 Hz (+/-5 %).
EMC Compliance: IEC EN 61800-3 Category C3 (Industrial) for cables up to 15m. Filter can be disconnected if required.
Frame Size: D
200mm Wide x 190mm Deep x 310mm High.
Mounting via 2 x 10mm holes and 2 x 9mm slots on 290mm x 180mm centres. Cannot be DIN Mounted
Weight: 7.5kg.
Speed Control Range: 0-599Hz.
Braking (DBr): Built-in braking Unit. Fit an External braking resistor if this feature is required, Resistor is not supplied see linked products below. For 125% Braking Torque 10% Duty Cycle (10 seconds every 100 seconds) fit a 26 Ohm 3000W resistor. Max Rating: 18 Ohm Min, 32.7kW peak, 10s max.
Supplied WITHOUT Keypad, see linked items below.
1 x Analogue Input, 6 x Digital Inputs (PNP/NPN), 1 x Analogue Output, 1 x Digital Output, 1 x Relay Contact Set.
RJ-45 Port available for Serial Comms or PC (With USB Adapter) or Remote Keypad.
Serial Communications: RS485 Modbus.
Fitted with Internal PLC, Programming Software required. Optional I/O modules available
IP20; Cubicle mount only.
Heat Loss: 676W at max output
Cooling: Internal Fan.
Ambient: -10 to 50°C (40°C when units mounted side-by-side)
Ventilation Space: Above: 150mm, Below: 150mm, Sides 50mm, Between Units: 0mm
Manufacturer Part Number: VFD220E43A