Delta VFD-E Series AC Inverter for 0.75kW (1HP) 400V 3ph motor to 2.5A. Operates in VxF or Sensorless Vector and converts fixed frequency Three Phase 400V input to variable frequency Three Phase 400V to control a standard AC Induction Motor.
Output Current: 2.5A with 150% Overload for 30 seconds
Input Current: 3.2A
Input Voltage: Three phase AC 380V–480V (+/-10 %), 50/60 Hz (+/-5 %).
EMC Compliance: IEC EN 61800-3 Category C3 (Industrial) for cables up to 15m. Filter can be disconnected if required.
Frame Size: A1
72mm Wide x 152mm Deep x 142mm High.
Mounting via 2 x 5.5mm holes and 2 x 5.5mm slots on 60mm x 120mm centres. For DIN mounting an Optional Kit is available
Weight: 1.2kg.
Speed Control Range: 0-599Hz.
Braking (DBr): Built-in braking Unit. Fit an External braking resistor if this feature is required, Resistor is not supplied see linked products below. For 125% Braking Torque 10% Duty Cycle (10 seconds every 100 seconds) fit a 750 Ohm 80W resistor. Max Rating: 127 Ohm Min, 4.5kW peak, 10s max.
Supplied WITHOUT Keypad, see linked items below.
1 x Analogue Input, 6 x Digital Inputs (PNP/NPN), 1 x Analogue Output, 1 x Digital Output, 1 x Relay Contact Set.
RJ-45 Port available for Serial Comms or PC (With USB Adapter) or Remote Keypad.
Serial Communications: RS485 Modbus.
Fitted with Internal PLC, Programming Software required. Optional I/O modules available
IP20; Cubicle mount only.
Heat Loss: 51W at max output
Cooling: Natural (No Fan).
Ambient: -10 to 50°C (40°C when units mounted side-by-side)
Ventilation Space: Above: 120mm, Below: 120mm, Sides 50mm, Between Units: 0mm
Manufacturer Part Number: VFD007E43T