Danfoss FC-102 Series AC Inverter for 5kW (7.5HP) 400V 3 Phase Fan or Centrifugal Pump in VxF control to 13A. Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction Motor.
IP66/Type 4X rated for indoor or outdoor use including rooftop air handling units. Corrosion resistance complies with IEC 60721-3-3 level 3C3. For outdoor installations the Inverter must be installed under a suitable cover to protect it from direct exposure to sun, snow and ice.
Size A5: 242mm Wide x 200mm Deep x 420mm High.
Weight: 14kg (approx.)
Overload: 110% x 60 seconds, 135% x 0.5 seconds.
Speed Control Range: 0-590Hz
Braking: None.
No operator keypad included, 2 Analogue Inputs, 4 Digital Inputs, 1 Analogue Output, 2 Digital Input/Outputs, 2 Relay Contact sets, DC Bus +/- Terminals, Terminals for RS485 Communications.
FC Protocol, N2 Metasys, FLN Apogee communication protocols built-in as standard.
Programmable from a PC via USB and free Danfoss MCT 10 software.
Input Current: 11.7A
Input Voltage: 380-480V Three Phase ±10% at 50-60Hz ±5%
EMC Compliance: IEC EN55011 Second Environment Class C2 (Industrial / Domestic). For First Class Compliance (C1) Motor cables are limited to 10m. Filter can be disabled if required.
Wall mount in clean environment or cubicle mount.
Rated 50°C Ambient.
Ventilation space in front: [not specified], above and below: 100mm, at sides: 0mm.
Heat Loss at max output: 187W
Mounting via 4 x holes at rear on 215mm x 402mm centres.
Full Manufacturer type code is FC-102P5K5T4E66H3XXXXOXSXXXXAXBXCXXXXDX. (135N8954)
Download the Danfoss FC102 Manual from the links below:-