Danfoss VLT Micro Drive FC-280 Series AC Frequency Inverter for 1.5kW (2HP) to 3.7A. Operates in standard VxF and Sensorless Vector and converts fixed frequency 400V Three Phase Input to variable frequency Three phase 400V output to control the speed of a standard AC Induction motor or Permanent Magnet Synchronous Machine.
No Keypad or Display is included - see linked products below for compatible options.
Overload Rating: 160% for 60 seconds
Output Current: 3.7A continuous at 45 Degrees°C.
Size K1 - 75mm Wide x 168mm Deep x 210mm High. IP20.
Weight: 2.5kg.
Coated PCBs
Speed Control Range - 0-500Hz
Braking: Integral (waiting on resistor data)
2 x Analogue Inputs, 6 x Digital Inputs (2 digital inputs can be configured as Encoder Inputs) 1 x Digital Input/Pulse Input, 1 x Analogue Output, 1 x Relay Contact set, Modbus RTU.
Programmable from a PC via Danfoss MCT 10 Set-up Software.
Input Current – 3.5A.@400V continuous. 5.6A for 60 seconds.
Input Voltage - 380-480V Three Phase ±10% at 50-60Hz.
EMC Filters to IEC/EN 61800-3 1st Environment (Industrial).
Cubicle mount; IP20
Rated at 40°C Ambient.
Ventilation space above and below - 100mm.
Ventilation space at sides - 0mm (drives can be mounted side by side)
Heat Loss at max output – 52.9W.
Mounting via 4 x 4.5mm diameter holes at rear on 198mm x 60mm centres
Full part number is - 134U2981
Typecode: FC-280P1K5T4E20H1BXCXXXSXXXXAX
Download the Danfoss FC280 Manual from the link below: