Danfoss FC-102 Series AC Inverter for 11kW (15HP) 400V 3 Phase Fan or Centrifugal Pump in VxF control to 24A. Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction Motor.
**This product is a non standard item, cannot be cancelled once order is placed**
Size B1: 242mm Wide x 260mm Deep x 480mm High. IP55.
Weight: 21.8kg.
Overload: 110% x 60 seconds, 135% x 0.5 seconds.
Speed Control Range: 0-590Hz.
Braking: None.
Option B Slot: MCB-114 VLT Sensor Input.
Graphical Keypad, 2 Analogue Inputs, 4 Digital Inputs, 1 Analogue Output, 2 Digital Input/Outputs, 2 Relay Contact sets, DC Bus +/- Terminals, Terminals for RS485 Communications.
FC Protocol, N2 Metasys, FLN Apogee communication protocols built-in as standard.
Programmable from a PC via USB and free Danfoss MCT 10 software.
Input Current: 24A
Input Voltage: 380-480V Three Phase ±10% at 50-60Hz ±5%
EMC Compliance: IEC EN55011 First Environment Class C1 (Domestic and Industrial). Motor cables are limited to 10m for C1 compliance. Filter can be disabled if required.
Wall mount in clean environment or cubicle mount.
Rated 45°C Ambient.
Ventilation space in front: [not specified], above and below: 200mm, at sides: 0mm.
Heat Loss at max output: 278W
Mounting via 4 x holes at rear on 210mm x 454 centres.
Manufacturer part number is 132H5267.
Type code is FC-102P11KT4E55H3TGXXXXSXXXXAXB4CXXXXDX.
Download the Danfoss FC102 Manual from the links below:-