Danfoss FC-102 Series AC Inverter for 3kW (5.5HP) 400V 3 Phase Fan or Centrifugal Pump in VxF control to 10A. Converts fixed frequency three phase 380-480Vac input to variable frequency three phase 400V to control the speed of a standard AC Induction Motor.
Enclosure Rating: IP66/Type 4X rated for indoor or outdoor use including rooftop air handling units. Corrosion resistance complies with IEC 60721-3-3 level 3C3. For outdoor installations the Inverter must be installed under a suitable cover to protect it from direct exposure to sun, snow and ice.
Dimensions: Size A5: 242mm Wide x 242mm Deep x 420mm High.
Weight: 8.9kg (approx.)
Output Current: 7.2A
Overload: 110% x 60 seconds, 135% x 0.5 seconds.
Speed Control Range: 0-590Hz
Braking: None.
Features: Graphical keypad included, 2 Analogue Inputs, 4 Digital Inputs, 1 Analogue Output, 2 Digital Input/Outputs, 2 Relay Contact sets, DC Bus +/- Terminals, Terminals for RS485 Communications.
FC Protocol, N2 Metasys, FLN Apogee communication protocols built-in as standard.
Programmable from a PC via USB and free Danfoss MCT 10 software.
Input Current: 9.0A
Input Voltage: 380-480V Three Phase ±10% at 50-60Hz ±5%
EMC Compliance: IEC EN55011 Second Environment Class C1 (Domestic). For First Environment (C1) Motor cables are limited to 10m. Filter can be disabled if required.
Mounting: Wall mount
Ambient: Rated 50°C.
Heat Loss at max output: 116W
Fitted with Metric Thread Cable Entry Option.
Full Manufacturers part number: 131Z2201. Type code: FC-102P3K0T4P66H3XGXXOXSXXXXAXBXCXXXXDX.
Download the Danfoss FC102 Manual from the links below:-