Danfoss FC-102 Series AC Inverter for 1.1kW (1.5HP) 400V 3 Phase Fan or Centrifugal Pump in VxF control to 3A. Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction Motor.
Size A4: 200mm Wide x 177mm Deep x 391mm High IP55.
Weight: 8.4kg.
Overload: 110% x 60 seconds, 135% x 0.5 seconds.
Speed Control Range: 0-590Hz
Braking: None.
Includes mains disconnect switch.
Graphical Keypad, 2 Analogue Inputs, 4 Digital Inputs, 1 Analogue Output, 2 Digital Input/Outputs, 2 Relay Contact sets, DC Bus +/- Terminals, Terminals for RS485 Communications.
FC Protocol, N2 Metasys, FLN Apogee communication protocols built-in as standard.
Programmable from a PC via USB and free Danfoss MCT 10 software.
Input Current: 2.7A
Input Voltage: 380-480V Three Phase ±10% at 50-60Hz ±5%
EMC Compliance: IEC EN55011 First Environment Class C2 (Domestic and Industrial). Motor Cable is limited to 10m for C1 compliance. Fitler can be disabled if required.
Wall mount in clean environment or cubicle mount.
Rated 45°C Ambient.
Ventilation space in front: [not specified], above and below: 100mm, at sides: 0mm.
Heat Loss at max output: 58W
Mounting via 4 x holes at rear on 171mm x 401 centres.
Manufacturer part number is 131N9382.
Full Type code is FC-102P1K1T4Z55H3XGX1OXSXXXXAXBXCXXXXDX.
Download the Danfoss FC102 Manual from the links below:-