WEG CFW501 Fan/Pump IP20 5.5kW 400V 3ph AC Inverter Drive, DBr, C2 EMC

CFW501C14P0T4DB20C2 (12209621)

Order Code: 30455
1 in stock (2+ normally 15 weeks)
Order by 3pm for next working day delivery*

List Price: £751.00

£380.01
(excl. VAT)
£456.01
(inc. VAT )
Price break
per unit
1+
£380.01

Condition: New with Warranty
Brand: WEG, Range: CFW501

WEG CFW501 HVAC Series AC Inverter for 5.5kW (7.5HP) 400V 3 Ph motor in VxF control to 14A. Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC induction motor.

HVAC and Pump Features:
Low Harmonic Distortion IIEC6180003-12; Advanced PID, Conformal Coated PCB’s
Communication Protocols: BACnet MS/TP,  Metasys NS,  Modbus-RTU
Software Features:

  • Fire Mode - Inhibits faults
  • Sleep / Wake Mode - Controls operating times
  • Broken Belt / Dry Pump - Identifies no load conditions
  • Energy Savings - Flux Reduction Capability
  • Short Cycle Protection - Limits Start Ups
  • HMI can display meaningful units as an alternative to Hz.

Output rating to 14A 5kHz, 40°C Ambient
Overload: 110% for 60s or 150% for 3s

Size C: 210mm (High) x 135mm (Wide) x 165mm (Deep). IP20
Weight: 3kg.

Speed Control Range: 0-500Hz
Dynamic Braking (DBr): Internal Brake Switch fitted as standard. (Does not have to be used; available if required)
Min Braking Resistance: 33 Ohms. Braking Current: 14A (Fit resistor only if Dynamic Braking is required)

Fixed Keypad (HMI)
2 Analogue Input, 4 Digital Inputs, 1 Analogue Output, 1 Digital Output, 2 Relay Contact sets (1 x NO, 1 x NC).
Comms: 2 x RS485 (Twin Wire) for Modbus RTU, BACnet MS/TP,  Metasys NS Communications and PC Programming using Superdrive G2 software. (see free download below)
STO: Not Available

Input Current: 13A
Input Voltage: 380-480V Three Phase +10% -15% at 50-60Hz (48-62Hz)
EMC Compliance: Internal Filter fitted to IEC EN61800-3 Category C2 (Industrial); Can be disconnected if required.

Cubicle mount.
Rated Operation: 40°C Ambient.
Ventilation space: 30mm Side, 40mm above; 50mm below, at sides: 50mm.
Heat Loss at max output: 198W
Mounting: DIN (35mm rail) or via 4 x M5 Fixings at rear on 195mm x 100mm centres

Extended Warranty Available: When purchased with a WEG W22 Motor (see linked products below) the warranty for the motor and the AC Inverter can be extended to 3 years. Terms and Conditions apply, registration process is required.

Manufacturer part number is CFW501C14P0T4DB20C2. (CFW501 C 14P0 T4 DB20C2) Alternative Part number: 12209621

Download the WEG CFW501 Manual from the link below:-

You may also be interested in...

Photo of Dynamic Brake Resistor, 36 Ohms, 500 Watts  CZ388396

Dynamic Brake Resistor, 36 Ohms, 500 Watts CZ388396

(IRV 500 36R J)

(CZ388396)

Order code: 21020

5 in stock

6+ normally 7 weeks

£81.00
£76.95
£72.90
1+
10+
50+
Photo of WEG Wall mount cover and gland box (protection kit) for size C CFW500

WEG Wall mount cover and gland box (protection kit) for size C CFW500

CFW500-KN1C

(12133824)

Order code: 27242

Delivery 15 weeks

£10.54
1+
£445.00
1+
Photo of WEG W22 IE3 Cast Iron 5.5kW Three Phase Motor 400V/690V 2 Pole 132S Frame B5

WEG W22 IE3 Cast Iron 5.5kW Three Phase Motor 400V/690V 2 Pole 132S Frame B5

12862433

Order code: 32752

7 in stock

8+ normally 5 weeks

£476.00
1+
£468.00
1+
£525.00
1+