ABB Drives ACS 800 AC Direct Torque Control (DTC) Frequency Inverter with Keypad for 30kW (40HP) 400V 3 Ph motor to 60A at High Overload or 37kW (50HP) to 80A when Fan/Pump rated. Simple to set-up with 400V three phase input for a standard AC Induction motor.
With Coated Control Boards (option +P901)
R5 Size - 300mm Wide x 286mm Deep x 739mm high.
IP21 Enclosure Protection Rating.
Weight 34kg
Light Overload Use - 110% x 60seconds every 5 minutes at 80A, 37kW.
Heavy Duty Use - 150% x 60 seconds every 5 minutes at 60A, 30kW.
Speed Control Range - 0/300Hz.
Braking - To 8 Ohm Minimum external resistor (not supplied) - see the Resistor options linked below or use the 'Which Resistor' button on this page.
Features -
Operator Keypad has a Multilingual Alpha Numeric Display (4 lines x 20 characters). Can be mounted remotely - see order code option 23635 below.
3 x Analogue Inputs, 2 x Analogue Outputs
7 x Digital Inputs, 3 x Digital (Relay) Outputs - maximum continuous current 2A, 24VDC or 115V/230VAC
1 x Reference Voltage Output +/- 10V, 10mA
Auxiliary Power Supply Output: +24VDC, 250mA
EMC Filters None.
Nominal Input Current - 83A.
Input Voltage - 380 to 415V three phase +-10% at 50/60Hz.
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Heat Loss at max output - 990W.
Full part number is – ACS800-01-0050-3+P901
Download the ABB ACS800 Catalogue from the link below:-