ABB Drives ACS 800 AC Direct Torque Control (DTC) Frequency Inverter with Keypad for 3kW (4HP) 400V 3 Ph motor control to 7.5A at High Overload or 4kW (5HP) to 10.2A when Fan/Pump rated. Simple to set-up with 400V three phase input for a standard AC Induction motor.
R2 Size - 165mm Wide x 226mm Deep x 405mm high.
Weight: 9Kg
IP21 Enclosure Protection Rating.
Light Overload Use - 110% x 60seconds every 5 minutes at 10.2A, 4kW.
Heavy Duty Use - 150% x 60 seconds every 5 minutes at 7.5A, 3kW.
Speed Control Range - 0/300Hz.
Braking - To 44 Ohm Minimum external resistor (not supplied) - see the Resistor options linked below or use the 'Which Resistor' button on this page.
Features -
Operator Keypad has a Multilingual Alpha Numeric Display (4 lines x 20 characters). Can be mounted remotely - see order code option 23635 below.
3 x Analogue Inputs, 2 x Analogue Outputs
7 x Digital Inputs, 3 x Digital (Relay) Outputs - maximum continuous current 2A, 24VDC or 115V/230VAC
1 x Reference Voltage Output +/- 10V, 10mA
Auxiliary Power Supply Output: +24VDC, 250mA
Coated Circuit Boards (Option +P901).
EMC Filters None.
Nominal Input Current - 10A.
Input Voltage - 380 to 415V three phase +-10% at 50/60Hz.
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Heat Loss at max output - 160W.
Full part number is:- ACS800-01-0006-3+P901
Download the ABB ACS800 Catalogue from the link below:-