ABB ACS480 series AC Inverter for 3kW (4HP) 400V 3ph motor to 7.2A at high overload, or 4kW (5.5HP) to 8.9A when fan/pump rated. Operates in standard VxF or Sensorless Vector Control and converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction Motor or Permanent Magnet motor.
Size R1: 73mm wide x 207mm deep x 223mm high. IP20.
Weight: 1.77kg.
Overload: 150% x 60 seconds every 10 minutes (High Overload)
Overload: 110% x 60 seconds every 10 minutes (Fan/Pump rated)
Speed Control Range: 0-599Hz
Dynamic Braking (DBr): 3kW continuous for minimum 53 Ohms, maximum 102 Ohms external resistor (not supplied – see linked products below).
Removable Keypad with USB mini-B socket for PC connection included.
I/O module included: 2 Analogue Inputs, 6 Digital Inputs, 2 Analogue Outputs, 3 Relay Contact Sets, terminals for Modbus RTU (EIA-485) communications.
Terminals for dual channel SIL3/PL e safe torque off (STO) included.
DC bus terminals included.
Input Current: 15A.
Input Voltage: 3-phase, 380 to 480 V, +10%/-15%, 48 to 63 Hz
EMC compliance: EN 61800-3: 2004 + A1: 2012 Category C2 (Industrial or restricted Domestic)
Cubicle mount.
Rated 50°C ambient.
Ventilation space above: 75mm, below: 75mm, at sides: 0mm, in front: [not specified].
Heat Loss at max output: 135W.
Mounting via 35mm DIN rail or 4 x 5mm diameter slotted holes at rear on 50mm x 191mm centres. Can also be side-mounted via or 2 x 5mm holes on 191mm centres.
Manufacturer part number is ACS480-04-09A5-4 or 3AXD50000047770.
Download the ABB ACS480 Manual and Quick Start Guide from the links below:-