ABB ACS480 series AC Inverter for 5.5kW (7.5HP) 400V 3ph motor to 12.6A at high overload, or 7.5kW (10HP) to 16.2A when fan/pump rated. Operates in standard VxF or Sensorless Vector Control and converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction Motor or Permanent Magnet motor.
Size R3: 172mm wide x 207mm deep x 220mm high. IP20.
Weight: 3.52kg.
Overload: 150% x 60 seconds every 10 minutes (High Overload)
Overload: 110% x 60 seconds every 10 minutes (Fan/Pump rated)
Speed Control Range: 0-599Hz
Dynamic Braking (DBr): 5.5kW continuous for minimum 32 Ohms, maximum 54 Ohms external resistor (not supplied – see linked products below).
Removable Keypad with USB mini-B socket for PC connection included.
I/O module included: 2 Analogue Inputs, 6 Digital Inputs, 2 Analogue Outputs, 3 Relay Contact Sets, terminals for Modbus RTU (EIA-485) communications.
Terminals for dual channel SIL3/PL e safe torque off (STO) included.
DC bus terminals included.
Input Current: 27.2A.
Input Voltage: 3-phase, 380 to 480 V, +10%/-15%, 48 to 63 Hz
EMC compliance: EN 61800-3: 2004 + A1: 2012 Category C2 (Industrial or restricted Domestic)
Cubicle mount.
Rated 50°C ambient.
Ventilation space above: 75mm, below: 75mm, at sides: 0mm, in front: [not specified].
Heat Loss at max output: 230W.
Mounting via 35mm DIN rail or 4 x 5mm diameter slotted holes at rear on 148mm x 191mm centres.
Manufacturer part number is ACS480-04-018A-4 or 3AXD50000047792.
Download the ABB ACS480 Manual and Quick Start Guide from the links below:-