ABB ACS 150 AC Frequency Frequency Inverter Drive with Keypad and Potentiometer for a 1.5kW (2HP) 400V 3 Ph motor, in VxF control to 4.1A. Converts fixed frequency Three Phase 400V input to variable frequency Three Phase 400V output to control the speed of a standard AC Induction motor.
**This product has been superseded please see new generation products below. If you require assistance migrating to the new products then please contact us**
Dimensions: R1 Size, 70mm Wide x 144mm Deep x 202mm high (plus cable clamp plate at 37mm).
Enclosure Rating: IP20.
Overload: 150% x 60seconds.
Speed Control Range: 0/500Hz.
Braking: To 130 Ohm Minimum, 300 Ohm Maximum external resistor (not supplied). See the Resistor options linked below or use the 'Brake Resistor Calculator' on this page.
Features: Front Mounted Potentiometer, 1 x Analogue Input, 5 Digital Inputs, 1 Relay Contact set.
Programmable from a pc via 'Flashdrop'.
EMC Filters to EN61800-3 to the 2nd Environment C3 (Industrial).
Input Current: 6.9A, or 3.5A when supplied via a minimum 4.6mH AC Input choke (see the products linked below) to reduce the metered kVA from 4.7kVA per drive, to 2.4kVA.
Input Voltage: 380V to 480V three phase +-10% at 50/60Hz.
Mounting: Cubicle mount onto symmetrical DIN rail or use the screw fixings for side or rear mounting. Wall mount in a clean environment when fitted with the optional top cover and gland box linked below.
Ambient Temperature: Rated at 40C.
Ventilation space above and below: 75mm.
Ventilation space at sides: 0mm.
Heat Loss: 58W at maximum output.
Part number: ACS150-03E-04A1-4 (68581788)
Download the ABB ACS150 Installation Guide and Manual from the links below:-