ABB ACS 150 AC Variable Frequency Inverter for a 0.55kW (0.75HP) 400V 3 Ph motor in VxF control to 1.9A. Converts fixed frequency Three Phase 400V input to variable frequency Three Phase 400V output to control the speed of a standard AC Induction motor.
Dimensions: R0 Size, 70mm Wide x 144mm Deep x 201mm high (plus cable clamp plate at 38mm).
Enclosure Rating: IP20.
Overload: 150% x 60seconds.
Speed Control Range: 0/500Hz.
Braking: To 175 Ohm Minimum, 800 Ohm Maximum external resistor (not supplied). See the resistor Options linked below, or use the 'Brake Resistor Calculator' on this page.
Features: Front Mounted Potentiometer, 1 x Analogue Input, 5 Digital Inputs, 1 Relay Contact set.
Programmable from a pc via 'Flashdrop'.
EMC Filters to EN61800-3 to the 2nd Environment C3 (Industrial).
Input Current: 3.6A, or 1.8A when supplied via a minimum 6.4mH AC Input choke (see the products linked below) to reduce the metered kVA from 2.5kVA per drive, to 1.5kVA.
Input Voltage: 380V/480V three phase +-10% at 50/60Hz.
Mounting: Cubicle mount onto symmetrical DIN rail, or use the screw fixings for side or rear mounting. Wall mount in a clean environment when fitted with the optional top cover and gland box linked below.
Ambient Temperature: Rated at 40C.
Ventilation space above and below: 75mm.
Ventilation space at sides: 0mm.
Heat Loss: 14W at maximum output.
Part Number: ACS150-03E-01A9-4 (68581745)
Replaces the ACS100 that is no longer manufactured.
Download the ABB ACS150 Installation Guide and Manual from the links below:-