ABB Drives ACH 550 HVAC AC Frequency Inverter for 7.5kW (10HP) 400V 3 Ph motor in VxF or Sensorless Vector control to 15A. Simple to set-up with 400V three phase input for a standard AC Induction motor.
Size R2: 222mm Wide x 246mm Deep x 561mm high. IP54.
Features - Basic Keypad, 2 x Analogue Inputs, 2 x Analogue Outputs, 6 x Digital Inputs, 3 x Relay Contact sets.
5% Swing choke included to minimise supply Harmonics.
EMC and RFI Filters included to 1st Environment (unrestricted) to EN61800-3.
Application Macros included for 12 x most common HVAC Applications.
Overload - 110% x 60seconds every 10 minutes.
Speed Control Range - 0/500Hz.
Braking - none.
Input Current - 15.4A.
Input Voltage - 380 to 480V three phase +-10% at 50/60Hz via 20A Bussman JJS-20 fuses or equal.
Input Power Factor - 0.98
Rated at 40C Ambient.
Heat Loss at max output - 232W.
Wall mount via rear screw fixings at 98mm x 418mm centres for M5 screws.
Full part number is - ACH550-01-015A-4+B055
Download the ACH550 Manual and Features Catalogue from the links below:-