SSD 650V AC Frequency Inverter for 0.75kW (1.0HP) 400V 3 Ph motor in VxF or Sensorless Flux Vector control to 2.5A. Simple set-up and ready to run in VxF from its default settings.
No Keypad included.
73mm Wide x 173mm Deep x 192mm High.
Overload - 150% x 30seconds.
Speed Control Range - 0/240Hz.
Braking - 100% duty into minimum 500 Ohm external resistor. See the Resistor options linked below or use the 'Which Resistor' button on this page.
2 x Analogue Inputs, 3/4 Digital Inputs, 1 Analogue output, 1/2 Digital outputs (one relay and one programmable in/out).
Input Current - 4.1A.
Input Voltage - 380/460V three phase +-10% at 50/60Hz.
EMC Filters: None
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation space above and below - 100mm.
Ventilation space at sides - 0mm.
Heat Loss at max output - 40W.
Mounting onto symmetrical DIN rail or use the detachable clip for screw fixing.
Full part number is - 650V-43125020-B01P00-A0 - Old Part Number [650V/007/400/0/00/0/UK/RS0/0] - Replaces: 605/007/400/3/0/0010/UK/0000 - Exactly the same as SSD Drives, Eurotherm Drives.
Download the Parker 650V Quick Start Guide, Product Manual and Software Manual from the links below:-