Parker SSD 650S 0.75kW 400V AC Inverter Drive for PM Motors, Unfiltered

Parker SSD 650S AC Frequency Inverter for 0.75kW (1.0HP) 400V 3 Ph Permanent Magnet Synchronous High Efficiency motor to 2.5A. Simple set-up and ready to run from its default settings.
73mm Wide x 173mm Deep x 192mm High.

Overload - 150% x 30seconds.
Speed Control Range - 0/240Hz.
Braking - 100% duty into minimum 500 Ohm external resistor.  See the Resistor options linked below or use the 'Which Resistor' button on this page.

2 x Analogue Inputs, 3/4 Digital Inputs, 1 Analogue output, 1/2 Digital outputs (one relay and one programmable in/out).
Input Current - 4.1A.
Input Voltage - 380/460V three phase +-10% at 50/60Hz.
EMC Filters - None

Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation space above and below - 100mm - Ventilation space at sides - 0mm.
Heat Loss at max output - 40W.
Mounting onto symmetrical DIN rail or use the detachable clip for screw fixing.

Part number is - 650S-43125020-B01P00-A1 (650S43125020B01P00A1)

Download the Parker SSD 650S Manual and Software Guide from the links below:-