WEG Automation CFW-08 A1 Plus AC Frequency Inverter for 2.2kW (3HP) 230V 3 Ph motor in VxF or Sensorless Vector Control control to 10A. Simple to set-up for use with either a Single Phase or Three Phase 230V input for a standard AC Induction motor.
The CFW08 range has been replaced with the CFW500. See linked products below for CFW500 of equivalent (or higher) rating and alternatives.
Can be used with either a Single Phase 230V or Three Phase 230V Supply without derating.
Size A - 115mm Wide x 150mm Deep x 200mm high. IP20.
Overload - 150% x 60 seconds every 10 minutes.
Speed Control Range - 0-300Hz.
Braking - To 22 Ohm minimum external resistor (not supplied) - see the Resistor Options linked below or use the 'Which Resistor' button on this page.
Features - Built-in membrane keypad, 2 x Analogue Inputs, 4 Digital Inputs, 1 x Analogue Output, 2 x Relay Contact sets.
Programmable from a PC via 'SuperDrive' Software.
EMC Filters - Class A to 2nd Environment C2 (Industrial).
Input Current - 22A (Single Phase 230V), 12A (Three Phase 230V).
Input Voltage - 200-240V Single or Three Phase +10%, -15% at 50/60Hz ±2Hz.
Rated at 40C Ambient.
Ventilation space above - 35mm
Ventilation space below - 50mm.
Ventilation space at sides - 15mm.
Ventilation space in front - 50mm.
Heat Loss at max output - 114W.
4 x Mountings for M5 bolts at rear.
Full part number is - CFW08 0100B 2024 EOA1FAZ
Download the WEG CFW-08 Manual, Addendum and Easy Start Guide from the links below:-