Universal Motors Goodrive GD10 series AC Inverter for 2.2kW (3) 230V 3ph motor in VxF control to 10A. Converts fixed frequency 230V single phase input to variable frequency 230V three phase to control the speed of a standard AC Induction motor.
Available from stock only, has been replaced with GD20. Please see linked products below.
Size 2: 100mm wide x 153.2mm deep x 170.5mm high; IP20
Mounting via 2 x 5mm diameter holes at rear on 89mm x 154mm centres
Weight: 1.3kg.
Overload: 150% x 60 seconds, 180% x 10 seconds, 200% x 1 second
Speed Control Range: 0-400Hz
Dynamic Braking (DBr): Internal Brake Switch fitted. (does not have to be used; available if required)
100% duty into minimum 21 Ohm, maximum 65 Ohm external resistor (not supplied). See linked products below for compatible resistor.
Removable Keypad with potentiometer, 1 Analogue Input, 4 Digital Inputs, 1 Digital Input/Output, 1 Analogue Output, 1 Relay Contact, Terminals for Modbus RS485 Communications.
STO: Not available on this model.
Input Current: 24A
Input Voltage: 220V-240V Single Phase -15% +10% at 50-60Hz ±5%
EMC Compliance: No integrated EMC filters, optional external filters available.
Cubicle mount.
Ambient operating temperature to 40°C.
Ventilation space in front: [not specified], above and below: 100mm, at sides: 100mm.
Heat Loss at max output: [not specified]
Universal Motors part number is VAR-GD102R2GS2B.
Download the Universal Motors GD10 Manual from the link below:-