Toshiba Tosvert VF-S15 Series AC Inverter for 0.75kW (1HP) 230V 3 Ph motor in VxF or Sensorless Vector control to 4.8A. Converts fixed frequency single phase 230V input to variable frequency three phase 230V to control the speed of a standard AC Induction or Permanent Magnet motor.
Size A4: 72mm Wide x 135mm Deep x 130mm High. IP20
Weight: 1.1kg.
Overload: 150% x 60 seconds, 200% x 0.5 seconds
Speed Control Range: 0.1-500Hz
Braking: Minimum 200 Ohm external resistor (not supplied) - See the Resistor options linked below or use the 'Which Resistor' button on this page.
Fixed Keypad with Speed dial
3 Analogue Inputs, 6 Digital Inputs, 1 Analogue Output, 1 Digital Output, 2 Relay Contact sets, RJ45 port for Modbus-RTU RS485 Communications.
Input Current: 10A
Input Voltage: 200-240V Single Phase +10% -15% at 50-60Hz ±5%
EMC Filters: IEC EN61800-3 Category C2 (Industrial and restricted Domestic) for motor cable lengths to 5m.
Cubicle mount.
Rated 40°C Ambient.
Ventilation space in front: [not specified].
Ventilation space above and below: 50mm.
Ventilation space at sides: 30mm (can be mounted side by side when top cover removed).
Heat Loss at max output: 46W
Mounting via 2 x 5mm holes at rear on 60mm x 121.5mm centres.
Manufacturer part number is VFS15S-2007PL-W1. Replaces the VF-S11 series.
Download the Toshiba VFS15 Manual from the link below:-