Teco E510 Series AC Inverter for 2.2kW (2.2HP) 230V3 Ph motor in VxF or Sensorless Vector control to 10.5A. Converts fixed frequency single phase 230Vinput to variable frequency three phase 230Vto control the speed of a standard AC Induction motor.
Size 2: 198mm Wide x 218.4mm Deep x 218.4mm High. IP66 with Isolator
Weight: 5.98kg.
Overload: 150% x 60 seconds
Speed Control Range: 0-650Hz
Braking (DBr): Minimum 70 Ohm external resistor (not supplied).
Speed Potentiometer.
2 Analogue Inputs, 6 Digital Inputs, 1 Analogue Output, 2 Relay Contact sets, 1 Safety Switch, RJ45 port for Modbus RS485 Communications.
Input Current: 23.9A
Input Voltage: 200-240V Single Phase +10% -15% at 50-60Hz
EMC Filters (EMC): IEC EN61800-3 / EN61800-5-1 Class A Category C2 (Industrial and restricted Domestic). Can be disabled if required.
Rated 50C Ambient.
Ventilation space in front: [not specified].
Ventilation space above and below: 120mm.
Ventilation space at sides: 50mm.
Heat Loss at max output: [not specified]
Mounting via 4 x holes at rear for M5 screws on 115mm x 315mm Centres.
Manufacturer part number is E510-203-H1FN4S. (E510-203-H1F-N4S)
Download the Teco E510 Manual and Quick Start Guide from the links below:-