Teco E510 IP66 0.75kW 230V 1ph to 3ph AC Inverter Drive; DBr, SW, C2 EMC

E510-201-H1FN4S

Order Code: 30915
Available to Order
Delivery normally 4 weeks

List Price: £496.86

£298.12
(excl. VAT)
£357.74
(inc. VAT )
Price break
per unit
1+
£298.12

Condition: New with Warranty
Brand: Teco, Range: E510

Teco E510 Series AC Inverter for 0.75kW (0.75HP) 230V3 Ph motor in VxF or Sensorless Vector control to 4.5A. Converts fixed frequency single phase 230Vinput to variable frequency three phase 230Vto control the speed of a standard AC Induction motor.

Size 1: 150.8mm Wide x 183mm Deep x 248.7mm High.  IP66
Weight: 2.9kg.

Overload: 150% x 60 seconds
Speed Control Range: 0-650Hz
Braking (DBr): Minimum 200 Ohm external resistor (not supplied).

Speed Potentiometer.
2 Analogue Inputs, 6 Digital Inputs, 1 Analogue Output, 2 Relay Contact sets, 1 Safety Switch, RJ45 port for Modbus RS485 Communications.
Input Current: 12A
Input Voltage: 200-240V Single Phase +10% -15% at 50-60Hz
EMC Filters (EMC): IEC EN61800-3 / EN61800-5-1 Class A Category C2 (Industrial and restricted Domestic). Can be disabled if required.

Rated 50°C Ambient.
Ventilation space in front: [not specified].
Ventilation space above and below: 120mm.
Ventilation space at sides: 50mm.
Heat Loss at max output: [not specified]
Mounting via 4 x holes at rear for M5 screws on 133.3mm x 230.2mm Centres.

Manufacturer part number is E510-201-H1FN4S.  (E510-201-H1F-N4S)

Download the Teco E510 Manual and Quick Start Guide from the links below:-

You may also be interested in...

Photo of Dynamic Brake Resistor, 200 Ohms, 60 Watts

Dynamic Brake Resistor, 200 Ohms, 60 Watts

IRV 60 200R FL500 J 1.5KV

Order code: 24503

25+ in stock

£23.00
£21.85
£20.70
1+
10+
50+