Schneider Altivar 31 (ATV31) series AC Inverter for 0.55kW (0.75HP) 230V 3 Ph motor in VxF or Sensorless Vector control to 3.7A. Converts fixed frequency single phase 230V input to variable frequency three phase 230V for a standard AC Induction motor.
The Altivar 31 series is now obsolete and has been replaced with the 312 Series. See linked products below for replacement.
Size 4 - 72mm Wide x 140mm Deep x 145mm High. IP20
Weight: 1.05kg.
Overload: 150% x 60 seconds
Speed Control Range: 0.5-500Hz
Braking: to 40 Ohm minimum external resistor (not supplied) - use the 'Which Resistor' button on this page.
3 Analogue Inputs, 1 Analogue Outputs, 1 Analogue/Digital Output, 6 Digital Inputs, 2 Relay Contact sets, RJ45 Modbus communication port.
Input Current: 6.8A
Input Voltage: 200-240V Single Phase -15% +10% at 50-60Hz ±5%
EMC Filters: 2nd Environment (Industrial)
Wall mount in clean environment or cubicle mount.
Rated 40°C Ambient.
Ventilation space in front: 10mm.
Ventilation space above and below: 50mm.
Ventilation space at sides: 50mm (0mm with top vent cover removed).
Heat Loss at max output: 46W.
Mounting via 2 x 5mm diameter holes at rear on 60mm x 121.5mm centres.
Manufacturer part number is ATV31H055M2. Previously sold under the Telemecanique brand. Replaces the Altivar ATV 28.
Download the Schneider Electric Altivar ATV 31 Manual and Quick Start Guide from the links below:-