Santerno AC Frequency Inverter for a 7.5kW (10HP) 230V 3 Ph motor in Simple VxF or Sensorless Flux Vector control to 32A. Converts single phase 230V input (or three phase 230V) to variable frequency three phase 230V for a standard AC Induction motor.
Simple set-up from 'Quick-Start' menu for control up to twice the motors nominal speed.
Size 4: 180mm Wide x 170mm Deep x 220mm High.
Enclosure rating: IP20 case.
Overload: 150% x 60seconds.
Speed Control Range: 0/400Hz.
Braking: 20% duty into minimum 15 Ohm external resistor.
EMC Compliance: to EN 61800-3 2nd edition 2nd environment C3 Category (Industrial).
Features: 2 x Analogue Inputs (one is Current input), 8 Digital Inputs, 1 Analogue output, 2 Digital outputs (one relay).
Input Current: Not specified, but via 63A circuit breaker or 50A Fuse.
Input Voltage: 200V to 230V Single or Three Phase +10%, -15% at 50/60Hz (±5%) (reduced kW rating at 200V).
Mounting: Cubicle mount via 4 x M4 screw fixings.
Ambient: Rated at 40C.
Ventilation space above and below: 100mm.
Ventilation space at sides: 50mm.
Part Number: Sinus M 0014 2S/T BA2K2, (M00142S/TBA2K2).
Download the Santerno Sinus Inverter Manual from the link below...