SSD 650V AC Frequency Inverter for 15kW (20HP) 230V 3 Ph motor to 53A at high overload or 18kW (25HP) to 65A when Fan/Pump rated, operates in VxF or Sensorless Flux Vector control. Simple set-up and ready to run in VxF from its default settings.
Size D - 252mm Wide x 245mm Deep x 453mm High.
Overload - 150% x 30seconds and 180% for 0.5seconds.
Speed Control Range - 0/240Hz without de-rating.
Braking - 100% for 20seconds or 35% duty into minimum 11.7 Ohm external resistor.
2 x Analogue Inputs, 3/5 Digital Inputs, 1 Analogue output, 1/3 Digital outputs (one relay and one programmable in/out).
Input Current - 53A at high overload or 65A when Fan/Pump rating set.
Input Voltage - 220V/240V three phase +-10% at 45/60Hz or 208V three phase with same current and power output reduced by 10%.
Input fuse - 63A at high overload or 80A when Fan/Pump rating set - to suit input bridge at 6000A²s.
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation space above and below - 70mm.
Ventilation space at sides - 15mm.
Heat Loss at max output - 740W at high overload or 920W when Fan/Pump rating set.
Mounting with M6 screw fixing on 150mm x 440mm centres.
Full part number is - 650V-232540D0-B01P00-A3. Was 650VD-0150-230-0011-UK-0-0-B0-0-0 - Exactly the same as SSD Drives and Eurotherm Drives - 650VD-0150-230-0010-UK-0-0-B0-0-0.
Download the 650V Technical and Software manuals from the link below...